Maximum service
life can be attained by complying with the
following
recommendations:
Working Pressure–The
hydraulic system pressure should not exceed the rated working pressure of the hose.
Pressure surges or peaks exceeding the rated working pressure are destructive
and must be taken into account when selecting a hose. It is not safe to use
hose assemblies above their rated working pressure.
Minimum Burst Pressure–Burst
pressures are reference pressures intended for destructive testing purposes and
design safety factors only. Do not subject hose to the Minimum Burst Pressure.
Temperature Range– The
hose should not be exposed to internal or external temperatures that exceed the
recommended limits.
Consult Product Application when hydraulic fluids contain emulsions or solutions. Some
fluids reduce the safe operating temperature of a hose therefore the fluid manufacturer’s
recommended maximum operating temperature for any given fluid must not be exceeded,
(i.e. water in a hydraulic hose).
No comments:
Post a Comment